• Inicio

Información

Need help choosing or can't find what you're looking for? We'll help you or get it for you!

TRIAL BIKE BRAKES SPARE PARTS

Trial bike brakes are a key part of the rider's performance, since the precision must be maximum and the application of the techniques depends on their correct functioning. Some of them, such as positioning, depend on your trial bike braking well. 

The paradox is that since there is no speed in this discipline, the wear of trial bike brake pads depends more on the type of use and age, than on finding useful brake pad surface. 

For a correct maintenance of the brakes of a trial bike, we have to make sure that the surface of the brake disc is free of dirt from materials such as oil or other residues. 

BRAKE PUMPS ON TRIAL MOTORCYCLES

The brake pumps of the trial bike are the ones that send the flow against the brake caliper. Therefore, this power must be direct and efficient. Its correct performance depends on the following points:

- Condition of the trial bike brake fluid: with the passage of time, the brake fluid oil loses its properties and it is advisable to bleed the entire circuit, introducing completely new DOT4 fluid. 

- Trial bike brake pump repair kit: this is where the lever and its pusher exert pressure inside the brake pump to push the flow to the brake caliper through the brake hose. 

The most commonly used trial bike brake pump is the Braktec and can be adapted to bikes that originally have the AJP trial bike brake pump, which is no longer available. 

LEVERS FOR TRIAL BIKES

The brake levers for trial bikes can be of different lengths and there are several manufacturers that sell them. Here is a list of the best ones:

- Original Braktec trial brake levers: they have standard length and are compatible with Braktec trial brake pumps. 

- Original Braktec trial clutch levers: they have standard length and are compatible with Braktec trial clutch pumps. 

- Braktec and AJP TW Parts trial clutch and brake levers: they have a standard length and are compatible with both Braktec and AJP brake pumps, as they have a double hole to place the pusher in one place or another. 

If you like colorful trial brake and clutch levers, TW Parts has these options:

- Braktec and AJP TW Parts blue trial brake and clutch levers.

- Braktec and AJP TW Parts Red Trial Brake and Clutch Levers

- Braktec and AJP TW Parts black trial brake and clutch levers

- Braktec and AJP TW Parts grey trial brake and clutch levers

The other major supplier is S3 Parts, which also sells trial brake and clutch levers in various colors. 

AJP Trial Brake and Clutch Levers

To replace a trial brake lever with AJP pump you must choose one of the previously mentioned Braktec - AJP brake levers with double bore, which will allow you to place the pusher on top. 

TRIAL BIKE BRAKE LEVERS

As for the brake pedal of trial bikes, there are original and also aftermarket products. The aftermarket industry mainly works on providing lighter materials and also on achieving a better toe grip. For this purpose, the splines are more pronounced or have smaller screws. 

Among the most important brands in the auxiliary industry for trial brake pedals are Costa Parts, Apico and Jitsie. 

At Trialworld Store you can find these brake pedals:

- Rear brake pedal for Beta REV3

- Rear brake pedal for Beta EVO

- Rear brake pedal for GASGAS TXT 

- Rear brake pedal for Montesa Cota 315R

- Rear brake pedal for Montesa Cota 4RT

- Rear brake pedal for Sherco Trial

- Rear brake pedal for Vertigo Vertical and Vertigo Nitro

- Rear brake pedal for TRRS Motorcycles

- Rear brake pedal for Electric Motion

- Rear brake pedal for Scorpa 

BRAKE PADS FOR TRIAL BIKES

The rotation of brake pads on a trial bike is low. Therefore, we recommend replacing them once a year, since not only the wear itself depends on the brake pads, but also the contamination of the material and its loss of properties. Let's not forget that they are in contact with mud, humidity, dirt, stones... so their wear is not only determined by the useful surface of the pad itself. 

One of the checks we recommend is to disassemble the brake pads and see how the pad itself is working on the brake disc, as there are cases where only a specific part of the pad is acting and not in its entirety, which reduces the braking power. 

TRIAL BRAKE PADS SEARCH ENGINE

BRAKE PADS FOR BETA TRIAL 

Front brake pads for Beta Zero and Beta TR

Rear brake pads for Beta Zero and Beta TR

Front and rear brake pads for Beta Techno 1994 to 1999

Front brake pads for Beta REV3 and Beta EVO 

Rear brake pads for Beta REV3

Rear brake pads for Beta EVO

BRAKE PADS FOR TRIAL GASGAS 

Front brake pads for GASGAS GT- JT- JTR - JTX Contact Trial 1989 - 1998 

Rear brake pads for GASGAS GT- JT- JTR - JTX Contact Trial 1989 - 1998 

Front brake pads for GASGAS TXT Edition (Hebo caliper) Trial (1999 - 2003) 

Front brake pads for GASGAS TXT PRO (AJP caliper) Trial (2002 - 2012) 

Front brake pads for GASGAS TXT RACING & GP Trial (2013 - 2018) (Braktec caliper without upper center bolt)

Front brake pads for GASGAS TXT RACING & GP Trial (2019 - present) (Braktec caliper with upper center bolt)

Rear brake pads for GASGAS TXT (2002 - present)

BRAKE PADS FOR MONTESA COTA TRIAL 

Front and rear brake pads for Montesa Cota 314R 

Rear brake pads for Montesa Cota 314R

Front brake pads for Montesa Cota 315R (1997 to 2000)

Rear brake pads for Montesa Cota 315R (1997 to 2000)

Front brake pads for Montesa Cota 315R (2001 to 2004)

Front brake pads for Montesa Cota 4RT (2005 - 2013)

Front brake pads for Montesa Cota 4RT (2014 - 2020) - Montesa Cota 300RR and Montesa 4Ride (2014 - 2020)

Front brake pads for Montesa Cota 4RT (2021 - present) - Montesa Cota 301RR and Montesa 4Ride (2021 - present)

BRAKE PADS FOR TRIAL MOTORCYCLES TRRS 

Front brake pads for TRRS One and X-Track (2016 - 2019)

Front brake pads for TRRS One and X-Track (2020 - present)

Rear brake pads for TRRS One and X-Track (all)

BRAKE PADS FOR VERTIGO TRIAL MOTORS 

Front brake pads for Vertigo Camo and Vertigo Vertical (2016 - 2019)

Front brake pads for Vertigo Nitro and Vertigo Vertical (2020 - 2021)

Rear brake pads for Vertigo Motors (all)

BRAKE PADS FOR SHERCO TRIAL 

Front brake pads for Sherco Trial (1999 - 2001)

Rear brake pads for Sherco Trial (1999 - 2001)

Front brake pads for Sherco Trial (2002 - 2022)

Rear brake pads for Sherco Trial (2002 - present)

BRAKE PADS FOR SCORPA DE TRIAL 

Front brake pads for Scorpa Trial (2009 - 2014)

Rear brake pads for Scorpa Trial (2009 - present)

Front brake pads for Scorpa de Trial (2015 - 2022)

BRAKE PADS FOR ELECTRIC MOTION TRIAL 

Front brake pads for Electric Motion Escape (standard)

Rear brake pads for Electric Motion Escape R and Electric Motion E-Pure Race (standard)

Rear brake pads for Electric Motion

BRAKE DISCS FOR TRIAL BIKES

The same thing happens with the brake discs as with the brake pads. It is difficult to appreciate the wear or its real state with the naked eye, even if it has received a blow or is warped. 

Trial bike brake discs require maintenance cleaning with a Brake Cleaner, ensuring that they are free of any residue and that the braking surface is clean. 

Homologated trial brake discs are those that are completely closed and you cannot put a finger inside them. In all national and international competitions the safety commission requires that the trial brake discs are completely closed. 

Product added to wishlist