Clutch pump Braktec mineral oil

Features Clutch pump trialBRAKTEC.

It is a BRAKTEC clutch pump of trialcompletely original, which equips an original BRAKTEC clutch pump cover in black color, hinge in black color and an original BRAKTEC gray brake lever

With which bike from trialis the BRAKTEC clutch pump compatible?

This BRAKTEC clutch pump is compatible with all clutch hoses of motorcycles from trialthat work with mineral oil

How do I install a clutch pump from trialBRAKTEC?

To fit this BRAKTEC clutch pump on our trial motorcycle, we will do a very simple operation

1. Remove the existing clutch pump from the handlebars.A

2. Unscrew the hose from the current clutch pump. We will leave the hose in a vertical position upwards, in order not to spill the mineral liquid inside it.A

3. Screw the hose onto the new BRAKTEC pump

4. Place the new BRAKTEC pump on the handlebar by opening the hinge and tightening the Allen screw.A

5. Once placed on the bike, position the pump perpendicular to the ground. We will open the top cover of the pump and proceed to the adjustment of the mineral oil level (it already comes with liquid). We will manipulate the handle gently to see if we manage to take out the air that has been able to catch the circuit through the clutch pump. We will see some bubbles coming out through the pump

6. In case of not having tact in point 5, we proceed to suck the circuit from the other end of the hose, just where it enters the crter. To do this, activate the clutch lever, and while it is pressed, open the bleed screw. Then, close the circuit and pump. We repeat the operation until we have feel in the clutch

7. Once we have the hydraulic circuit purged and with feel, we simply adjust the clutch lever pusher screw to find the feel we like best for braking.

Tutorial to bleed the clutch of a motorcycle of trial